The Forbes Group

Product Menu

Innatank®

Innatank® is the ground-breaking integrally bunded storage tank from Forbes.

Providing safe storage of hazardous liquids to the very highest levels of environmental protection.

Innatank®’s genuinely innovative design, consists of a helically wound tank with a separate close fitting bund which is assembled with the tank as one piece to enable ease of installation. Combined with the fail-safe overfill prevention and leak detection system, the Innatank® offers exceptional efficiency and uncompromising safety.

Being a tank in an integral bund with over the top discharge if required, Innatank offers an intrinsically safe method of storing and processing hazardous liquids.

Environment and personnel are fully protected against leakage or spills. Limited connections or breaches below liquid level through the tank or bund wall and continuous leak monitoring, which can give local or remote alarms, give complete peace of mind.

Efficient & Economical

The space-saving design with its small footprint allows for greater storage efficiencies and is easy to install.

Large cost saving with no civil bund required.

Reduced Maintenance 

No maintenance is required other than routine external inspection and checking the built-in monitoring system. No arrangements required to maintain the traditional bund from ingress of rainwater and eliminates the danger of flotation.

Built to Last

Design life of 20 years alongside guarantees of up to 10 years (duty dependent). Exceptional chemical resistance as with all Forbes products.

System Options

  • Continuous Bund Monitoring Alarm System
  • Local alarm
  • Remote alarm (via phone if required)
  • ‘Over the top’ discharge system with or without dual containment pipework
  • Lockable if required
  • Supplied with pump system for priming only or to feed your process
  • Air priming discharge system complete with small air pump
  • Suction dip pip to allow for sludge removal
  • Available with or without dual containment pipework
  • Lockable if required
  • Fail safe ‘overfill protection’ system not requiring an overflow
  • To be filled from tanker by pad air or pumped delivery
  • Pneumatic – with or without auto pump
  • Float & follower (Cat & Mouse)
  • Ultrasonic/Radar
  • Access to roof of tank – Ladder and handrail assembly
  • Vent duct and scrubber for fuming liquids
  • Immersion heating

Technical Specifications

  • Integral bund featuring 'over the top' discharge
  • Total containment providing exceptional safety
  • Small footprint - no requirement for a civil bund
  • Capacities of up to 50 cubic metres

Capacities in excess of 50m³ and certified to DVS2205 & EN12573. The leakage prevention system (conforming to BS EN 13616) prevents overfilling. Innatank conforms to the requirements of the Environmental Agency’s document PPG 2

The sizes given are our most economical suggested dimensions for a given volume. All of our tanks are built to order, and any of these dimensions can be modified to suit specific restrictions and requirements.

To discuss your specific needs further please contact us.

Innatank® Range with 3000mm inside diameter.
ModelCapacity
(Litres)
Inside Diameter
(mm)
Wall Height
(mm)
Cone Top
(mm)
Innatank® 30/161600030002900405
Innatank® 30/181800030003150405
Innatank® 30/202000030003450405
Innatank® 30/252500030004150405
Innatank® 30/303000030004900405

Innatank® Range with 3500mm inside diameter.

ModelCapacity
(Litres)
Inside Diameter
(mm)
Wall Height
(mm)
Cone Top
(mm)
Innatank® 35/202000035002680470
Innatank® 35/252500035003200470
Innatank® 35/303000035003720470
Innatank® 35/353500035004240470
Innatank® 35/404000035004750470

Innatank® Range with 4000mm inside diameter.

ModelCapacity
(Litres)
Inside Diameter
(mm)
Wall Height
(mm)
Cone Top
(mm)
Innatank® 40/202000040002200540
Innatank® 40/252500040002600540
Innatank® 40/303000040003000540
Innatank® 40/353500040003400540
Innatank® 40/404000040003800540
Innatank® 40/454500040004200540
Innatank® 40/505000040004600540

Speak to our sales team to find out more.

+44 (0)1366 389600

sales@forbesgroup.co.uk

Call Back
close slider

Request a call back

Enter your details and we will call you back within 1 hour.

09:00 – 17:00 GMT (Monday–Friday).

By using this form you agree to us processing your personal data.